Free US shipping on orders $49+ · 30-day returns
Cart 0

November 17, 2026 · 6 min read

How to choose a motorcycle phone mount (without wrecking your phone’s camera)

A phone mount is the first accessory most riders buy, and it’s the one people most often buy twice. Here’s how to get it right the first time.

1. Know the vibration problem

Modern phone cameras use tiny moving parts for optical image stabilization and autofocus. In a support article, Apple says long-term exposure to high-amplitude vibration, like that from high-power motorcycle engines, can degrade the iPhone camera system. Apple recommends against attaching an iPhone to motorcycles with high-power or high-volume engines, and suggests a vibration-dampening mount for lower-powered scooters and mopeds. Other phone makers use similar camera hardware, so the same caution applies.

What that means for you:

  • Use a vibration dampener, whatever you ride. It’s cheap insurance.
  • Big twins and big singles (many cruisers, thumpers and adventure bikes) shake the most at the bars. Consider an older “nav-only” phone or a dedicated GPS for long trips, rather than risking your main phone’s camera.
  • Watch for warning signs: if photos come out blurry or you hear a faint buzz from the lens, stop mounting that phone on that bike.

2. Pick a mounting point

Mount point Good for Watch out for
Handlebar clamp Most bikes, easy to install Most vibration; check it clears your mirrors and levers
Mirror stem Clean look, keeps bars clear Mirror bolts loosen; re-torque often
Stem / fork-tube bolt Centered, very solid Needs the right size adapter for your bike

3. Choose the holding style

  • Spring clamp (four-corner or “claw”): fits almost any phone and case. Look for a design that locks, not just one held by spring tension.
  • Silicone net/strap: adds a backup if the clamp lets go. Worth it on rough roads.
  • Magnetic / quick-release: fastest on and off. Make sure it has a mechanical lock, not just magnets, for motorcycle use.

4. Don’t forget power

A phone running navigation with the screen on will drain fast. A handlebar USB charger (look for a weatherproof cap and an inline fuse) keeps you topped up. Route the cable so it can’t snag on the steering stops.

5. Install checklist

  1. Turn the bars lock to lock and make sure nothing touches the tank, cables or levers.
  2. Torque clamp bolts snug. Don’t crush the bar.
  3. Ride a short loop and re-check before a long trip.

Browse our Ride & Navigate collection for mounts and chargers we’ve picked for daily riding.